Caring for Unglazed Ceramics: Cleaning & Storage
Handmade ceramics are prized for their unique aesthetic and tactile qualities, but unglazed clay areas require specific maintenance. Whether on the outer base of a mug, a decorative vase, or raw earthenware vessels, exposed ceramic bodies absorb oils, minerals, and moisture if left unsealed or improperly cleaned.
Understanding Exposed Ceramic Surfaces
Exposed clay bodies—such as stoneware, terracotta, or porcelain left unglazed after firing—possess varying degrees of porosity. While high-fired porcelain and vitreous stoneware have very low water absorption rates (below 0.5%), low-fired earthenware remains porous.
Without a protective glass layer (glaze), unglazed surfaces can harbor food particles, absorb skin oils, and develop water rings or mineral deposits over time.
Daily Cleaning Protocol for Unglazed Ceramics
Cleaning raw ceramic surfaces requires gentle methods that prevent moisture from penetrating deep into the clay body.
- Avoid commercial detergents: Never use synthetic dish soaps with heavy synthetic fragrances or dye additives on unglazed functional ceramics, as the clay can absorb scent compounds.
- Use mild washing agents: Wash with warm water and a small amount of neutral sodium bicarbonate (baking soda) or mild plant-based soap.
- Scrub gently: Use a soft natural-bristle brush or microfiber cloth. Avoid steel wool or harsh abrasive pads, which can scratch the smooth clay surface and leave metallic scuffs.
- Rinse thoroughly: Pass clean, lukewarm water over the piece to remove all soap residues.
Removing Stains and Mineral Deposits
Because unglazed clay is absorbent, organic liquids like tea, coffee, or oil can cause discoloration:
- Baking soda paste: For grease spots or tea marks, mix three parts baking soda with one part water to form a thick paste. Apply to the stain, leave for 15 minutes, and scrub gently with a soft brush before rinsing.
- Diluted white vinegar: For hard water lime deposits on decorative vases, wipe the area with a cloth dampened in a 1:1 solution of water and white distilled vinegar. Rinse immediately to prevent acid from altering the surface tone.
Drying and Storage Maintenance
Moisture trapped inside porous ceramic bodies can lead to internal mold growth or structural weakening during freeze-thaw cycles.
- Air-dry completely: After washing, set unglazed items upside down on a drying rack in a well-ventilated area for at least 24 hours before placing them in enclosed cabinets.
- Prevent moisture trapping: Never stack wet unglazed plates or bowls directly on top of each other. Place soft felt or linen pads between stacked ceramic pieces to prevent friction scratches and surface abrasion.
Caring for Unglazed Ceramics: Cleaning & Storage | Mooteza