Managing Pottery Glaze Suspension & Specific Gravity

Pottery glazes that freeze, turn into hard clay lumps at the bottom of the bucket, or create uneven, streaky application often suffer from improper suspension and specific gravity issues. Glaze suspension refers to keeping mineral particles floating evenly in water without settling into a dense brick, while specific gravity measures glaze concentration. Mastering suspension additives and gravity adjustments ensures smooth, consistent dipping and brushing.

Understanding Specific Gravity and Glaze Target Ranges

Specific gravity (SG) compares the weight of a glaze liquid to an equal volume of pure water. Operating at the correct SG ensures predictable glaze thickness during application.

Resolving Hard Settling with Flocculants

When glaze particles settle into a hard, cement-like layer at the bucket bottom, the slurry lacks sufficient electrostatic repulsion between particles. Adding a chemical flocculant forces fine clay particles to clump lightly (flocculate), trapping heavy minerals in suspension.

  1. Epsom Salt (Magnesium Sulfate): The most accessible and effective flocculant for studio potters. Prepare a saturated solution by dissolving 200 g of Epsom salts in 500 mL of hot water. Add the solution to the glaze slurry one teaspoon at a time while stirring vigorously until the glaze thickens to a creamy consistency.
  2. Calcium Chloride: Highly effective for glazes containing high amounts of frits or low clay content (under 10%). Add a 10% calcium chloride liquid solution dropwise to restore suspension.
  3. Bentonite: Add 1–2% bentonite to dry glaze ingredients before adding water. Bentonite expands in water, creating a physical network that holds heavy silica and feldspar particles aloft.

Using Organic Binders for Smooth Brush Application

Glazes designed for brushing require extra workability and green-strength so layers do not flake off or crack prior to kiln firing.

Adjusting Deflocculated Slurries and Maintaining Glaze Buckets

Over-flocculated glazes become overly thick like pudding, resulting in heavy, uneven dips that pull away or crawl during firing.

If a glaze is too thick despite having a low specific gravity, it is over-flocculated. Add a few drops of sodium silicate or Darvan 7 (deflocculants) to thin the slurry without adding extra water.

Always screen aged glazes through an 80-mesh or 100-mesh sieve before dipping production pieces. Store glaze buckets tightly sealed with airtight lids to prevent water evaporation, and re-check specific gravity every 30 days or before major dipping sessions.

Managing Pottery Glaze Suspension & Specific Gravity | Mooteza